The BrosTrend Extender is a networking device that boosts
your WiFi signals. It provides you heavy bandwidth with up to 1200 mbps,which
enhances your video streaming and online gaming experience. In this article, ypu
will learn how setup BrosTrend WiFi Extender at home.
Steps to Setup BrosTrend
extender
There are two methods to setup your Extender. First is setup
via WPS button and second is manually setup using web interface. Below, we will
learn about both in detail:
·
Via WPS
Button
·
Manually
Setup
Setup
Via WPS Button
It is the easiest method to setup your extender. WPS button
is present on both the router and the extender. Follow the steps to setup:
1.
Plug in your root router into the wall socket
and turn it on.
2.
Keep the extender close to the router and turn
on by plugging it.
3.
Press WPS button of Router for 2-5 seconds,
within 2 minutes press the WPS button of the Extender.
4.
When the signal LED is turn on indicates that
setup process is complete.
If you are failed to setup your extender via WPS button,
then you can try to setup your Extender manually.
Manually
Setup
You will need to use the web address or IP address of the
BrosTrend Extender to setup your extender manually, steps are:
1.
Plug in your router and extender to the power
outlet and turn them on.
2.
Connect your device to network of extender using
network named BrosTrend_Ext.
3.
It does not require any password.
4.
Go to the any web browser on your computer, type
re.brostrend.com or Ip address 192.168.0.254 and press enter.
5.
Here, you see a create password. Create and
remember password for future login.
6.
After login, a dashboard will open. Click on the
Extend Network option.
7.
Select the network which you want to extend. And
enter the network key.
8.
There would be a prompt show “Extendes
Successfully”
Now your extender completely set up. You can connect your devices to the extender and enjoy seamless WiFi network.
BrosTrendAXE5400
BrosTrend AXE5400 is a USB WiFI Adapter. The USB WiFi Adapters
are networking devices. It will help your device to get internet signals.
Simply, these WiFi adapters connect your wired devices to the network without
using any cable.
USB Adapter plugging into the computer’s USB port. This adapters also know as Ethernet adapter, Serial port adapter and Bluetooth adapters.
Troubleshooting Tips
If you are facing issues related to BrosTrend Extender such
as BrosTrend WiFi
Extender not showing up, not connecting to internet and not working etc. To resolve this
type of issues, follow the troubleshooting tips given below:
1.
Check if your extender and router are receiving
sufficient power supply.
2.
Make sure the extender is properly setup or not.
3.
Check the Firmware Updates of extender, if there
is any, update it.
4.
Ensure that there is not any electronic
interference between the router and the extender.
5.
Check all the Cables and the ports of the
router.
6.
Perform the Reboot or Reset Process.
Reboot The extender
Simply, turn off your extender and plug it off. After few
seconds plug in and turn on your extender. If your problem doesn't get solved
even after doing this, then Reboot all network devices.
Reset
To reset your extender, press the reset button for 5-10 seconds. This button is presence on the extender. After pressing button, it will take few minutes to complete reset process.
Conclusion
In this article you read what are BrosTrenWiFi extender and BrosTrend AXE5400 and how you can setupBrosTrend Extender at home. And we also learned Troubleshooting tips by which we can solve the issues related to Extender.
