Setting up your Netgear Nighthawk Extender without WPS? Don’t worry—it’s easier than you think! Many older routers don’t have a WPS button, so you’ll need to set up your extender through the web interface instead. Plus, for a more stable connection, you can connect the Nighthawk extender to your router using an Ethernet cable. Whether you want to boost your Wi-Fi signal or extend your network range, this guide will walk you through each simple step to set up your Netgear Nighthawk WiFi extender without WPS.
Methods to
Configure Nighthawk Extender
We describe two methods here to complete your Nighthawk extender setup.
1. Using
Ethernet Cable
2. Using
Router’s Network
Using Ethernet Cable
When you are using the Ethernet cable for Netgear Nighthawk
Extender setup, it will be stable connection than a wireless connection. We
recommended this method when you don’t use the WPS button to connect. Steps to
use this method:
·
Position the Nighthawk extender between the places
which among between router and the dead network area.
·
Plug the Netgear Nighthawk extender into the
power socket.
·
You can receive an Ethernet cable with an
extender.
·
If you haven’t received it, then you need to buy
it separately.
· Use this cable to attach the Nighthawk extender to the router.
When you connect the extender properly to the router,
configure the extender using the web interface.
Using Router’s Network (Configuration)
We can also use the main router’s SSID and password to
connect the extender to the router. You can also use this method to configure
your extender after connecting the Ethernet cable.
·
First of all, you need to connect your device to
the network of the extender.
·
If you also want to connect the device with an
Ethernet cable.
·
After that, use the web browser and type
routerlogin.net or 192.168.1.1 into the URL bar.
·
You will see a login screen there after pressing
Enter.
·
Fill default username and password in the given
boxes.
·
You will jump to the web interface after
clicking on the Login button.
·
In this interface, select the Option named WiFi
Range Extender.
·
After this, choose the SSID and password of the
main router.
When you complete all of these steps, your Nighthawk
extender will be connected to your router.
Solution: If You
Unable to set up Nighthawk Extender
If your Nighthawk extender is not setting up, try these easy
solutions:
Restart Everything
Unplug your extender and router.
Wait for 30 seconds. Then plug them back in. Sometimes a quick restart can fix
setup issues.
Check Internet
Connection
Make sure your main WiFi router has
internet. Try using the internet on your phone or computer to check.
Use a Different
Device
If the setup does not work on your phone;
try using a laptop or computer. Some phones or tablets may not open the setup
page properly.
Moves the Extender
Closer to the Router
If the extender is too far from the
router, it won’t connect. Plug it into a socket closer to your router.
Clear Browser Cache
If the setup page doesn’t open, clear
your browser's cache and cookies. Then try again.
Use the Correct Web
Address
Make sure you type http://mywifiext.net
or 192.168.1.250 in the address bar. Do not type it in a search engine.
Reset the Extender
Use a paperclip to press and hold the Reset button on the extender for 10
seconds. Lights will blink. Then try again.
Disable VPN or
Firewall Temporarily
Sometimes a VPN or firewall blocks the
setup. Turn them off during setup, then turn them back on later.
Update Your Browser
or Use Another One
If one browser doesn’t work; try Chrome,
Edge, or Firefox. Make sure it’s up to date.
These simple solutions can fix most setup problems with your
Netgear Nighthawk extender.
Conclusion
We hope you learned to set up your Nighthawk extender without the WPS button. Use the Ethernet cable or WiFi details to connect your extender to the router. We provided detailed instructions for your help. Additionally, in the above article, there are some common troubleshooting tips to resolve your issues while setting up the extender.
